Plenum-Gard Nonmetallic Flexible Optical Fiber/Communication Raceway
Plenum-Gard is a low-smoke, low-flame propagation, nonmetallic flexible corrugated raceway for use in the efficient cable management of plenum cable (optical fiber or communication) in plenum areas.

Plenum-Gard provides cable identification in the industry standard, datacom orange (other colors available on request). It also provides organization and ease-of-install for applications within the plenum (UL-910), the riser (UL1666) and areas of General Purpose (UL1581), as outlined in the current National Electrical Code, Article 770. Additionally, it is allowed for use with telecommunications cables as described in the National Electrical Code, Article 800.

These raceway systems make your system "future-proof" providing an easy means to replace old cabling with new.

Plenum-Gard is available in a wide range of sizes: 3/4-in. to 2-in. diameters, complemented with a complete line of fittings and accessories.

Riser-Gard Nonmetallic Flexible Optical Fiber/Communication Raceway
This new raceway is for use in the management and protection of cable in riser applications. The product is UL-listed and conforms to the current

National Electrical Code for use with riser or general purpose Optical Fiber cables (Art. 770) or Communication cable (Art. 800). The 1999 NEC, Article 770, will require listing of All General Purpose Raceways; Riser-Gard will meet that need. Additionally, it is allowed for use with telecommunications cables as described in the 1999 NEC, Article 800.

Riser-Gard is available in 3/4-in. through 2-in. diameters and comes in standard coil lengths for short runs and stock reels for longer runs.

Multi-Gard Multi-Celled Raceway
Multi-Gard is a multiple celled cable management/ protection raceway system used in outside plant direct burial applications. Standard lengths of 20-foot sections with three 1-1/4" or four 1" pre-installed PVC

silicone lined inner ducts coupled by a gasketed coupling body. Our new gasket system allows contractors to install cable using high air pressure jetting machines, as well as traditional cable pulling installations. The system comes complete with a full line of adapters, bends, couplings, terminators and accessories.