Lutron LQSE-4A-120-D DIN Rail Mount 4-Zone Phase Adaptive Power Module 120-Volt 10-Amp HomeWorks® QS

  

*Images are for illustration purposes only and may not be an exact representation of the product

Lutron LQSE-4A-120-D DIN Rail Mount 4-Zone Phase Adaptive Power Module 120-Volt 10-Amp HomeWorks® QS

SKU: 704928
Lutron HomeWorks® QS 4-Zone phase adaptive power module has a voltage rating of 120-Volts at 50/60-Hz, current rating of 10-Amps. IP20 rated module with button actuator, has NC contact configuration. It supports a conductor of size 16-10-AWG for mains and zone, 20-10-AWG/20-16-AWG for CCI and 18-12-AWG for power/22-AWG for data QS wiring. DIN rail mountable module with ON/OFF/raise/lower action, has cast aluminum housing and stainless steel hardware terminal connection. It withstands voltage surges up to 6000-Volts and current surges up to 3000-Amps.This module with 24-BTU/Hour heating capacity, supports LED, Hi-lume A-series LTEF, SSL7A-2015, incandescent/halogen, ELV, neon/cold cathode and MLV loads. It measures 8.5-Inch x 3.54-Inch x 2.99-Inch. Module meets cULus, NOM, Lutron QS registered to ISO 9001.2008 and ANSI/IEEE C62.41, SSL7A-2015 standards.
  • Can be used in a HomeWorks® QS system to control and manage light in an entire home or building
  • Contains QS link for seamless integration of lights and controls
  • RTISS equipped technology compensates for incoming line voltage variations (up to +/- 2% change in frequency /second) such as changes in RMS voltage, frequency shifts, harmonics and line noise
  • Features air gap OFF (when all zones are OFF)
  • Has integral protection for common temporary over-current and over-voltage conditions
  • LEDs on the module provide diagnostic information and buttons on the module provide override control
  • Features manual override contact closure input (CCI) and programmable contact closure output (CCO)
  • Incorporates power failure memory to automatically return the outputs to the levels they were set to prior to a power outage

Overview

Lutron HomeWorks® QS 4-Zone phase adaptive power module has a voltage rating of 120-Volts at 50/60-Hz, current rating of 10-Amps. IP20 rated module with button actuator, has NC contact configuration. It supports a conductor of size 16-10-AWG for mains and zone, 20-10-AWG/20-16-AWG for CCI and 18-12-AWG for power/22-AWG for data QS wiring. DIN rail mountable module with ON/OFF/raise/lower action, has cast aluminum housing and stainless steel hardware terminal connection. It withstands voltage surges up to 6000-Volts and current surges up to 3000-Amps.This module with 24-BTU/Hour heating capacity, supports LED, Hi-lume A-series LTEF, SSL7A-2015, incandescent/halogen, ELV, neon/cold cathode and MLV loads. It measures 8.5-Inch x 3.54-Inch x 2.99-Inch. Module meets cULus, NOM, Lutron QS registered to ISO 9001.2008 and ANSI/IEEE C62.41, SSL7A-2015 standards.

Specifications

Temperature Rating
32 to 86 deg F Room Ambient
Sub Brand
HomeWorks® QS
Phase
No
Type
4-Zone
Terminal Connection
Mains, CCI, Zone Wire and QS Link
Standards
cULus Certified, NOM Certified, Lutron QS Registered to ISO 9001.2008, Meets ANSI/IEEE standard C62.41, SSL7A-2015
Voltage Rating
120 Volt
Load Rating
LED: 2 Amp; Hi-Lumen A-Series LTE: 2 Amp (6 Drivers Maximum); SSL7A-2015: 100 Watt; Incandescent/Halogen/ELV/Neon/Cold Cathode/MLV: 400/350/300 Watt Zone 1, 250/200/150 Watt Zone 2/3/4
Switch Type
No
UNSPSC
41113630
RoHS Flag
Yes
Country Of Origin
France
Energy Star Flag
No
Mounting
DIN Rail
Action
ON/OFF/Raise/Lower
Feature8
Incorporates power failure memory to automatically return the outputs to the levels they were set to prior to a power outage
Manufacturer Name
Lutron
Manufacturer Part Number
LQSE-4A-120-D
Item Name
Phase Adaptive Power Module
Contact Configuration
NC
Degree of Protection
IP20
Dimensions
8.5 Inch Length x 3.54 Inch Width x 2.99 Inch Height
Environmental Conditions
<90% Non-Condensing Relative Humidity
Finish
No
Frequency Rating
50/60 Hz
Conductor Size
16-10 AWG Mains and Zone, 20-10 AWG/20-16 AWG CCI, 18-12 AWG Power/22 AWG Data QS Wiring
Brand Name
Lutron
Amperage Rating
10 Amp
Actuator
Button

Documents

Brochure Instruction Guide
  1. Registration

    Click here to login or register your account. Business account customers will have access to account pricing and payment options.

  2. Help Center

    Click here for answers to common questions about ordering, shipping, payment, and returns, as well as contact information for our customer service team.

  3. Branch Locator

    Updating your home branch will make scheduling pick up orders faster and easier and will improve search results by bringing local products to the top of the list.

  4. Search

    Search using keywords, manufacturer part numbers, SKUs, trade slang, and more…

  5. Shop by Category

    Browse our catalog of thousands of products…

  6. Newsletter

    Sign up here to receive our latest deals and to be notified as we continue to improve the site.