Q-Mark CWH1202DSF Contemporary Commercial Fan-Forced Wall Heater 1-Phase 6826/3413 BTU/Hour at 240-Volt 5120/2560 BTU/Hour at 208-Volt 2000/1000-Watt at 240-Volt 1500/750-Watt at 208-Volt 8.3/4.2-Amp at 240-Volt 7.2/3.61-Amp at 208-Volt Northern White

  

*Images are for illustration purposes only and may not be an exact representation of the product

Q-Mark CWH1202DSF Contemporary Commercial Fan-Forced Wall Heater 1-Phase 6826/3413 BTU/Hour at 240-Volt 5120/2560 BTU/Hour at 208-Volt 2000/1000-Watt at 240-Volt 1500/750-Watt at 208-Volt 8.3/4.2-Amp at 240-Volt 7.2/3.61-Amp at 208-Volt Northern White

SKU: 920007
Q-Mark CWH1000 Model Contemporary commercial fan-forced wall heater delivers an output of 6826/3413 BTU/Hour at 240-Volts, 5120/2560 BTU/Hour at 208-Volts. This 1-Phase heater employs impedance protected and permanently lubricated motor for long lasting performance. The 80% nickel, 20% chromium enclosed steel sheath heating element covers the entire air discharge area to ensure uniform heating of all discharged air. It operates at an air flow rate of 65 CFM at 30-ft. It has a voltage rating of 240/208-Volts, current rating of 8.3/4.2-Amps at 240-Volts, 7.2/3.61-Amps at 208-Volts and power rating of 2000/1000-Watts at 240-Volts, 1500/750-Watts at 208-Volts. The heater in northern white color, has heavy Gauge steel construction for added durability. Power On/OFF switch provides added safety during maintenance. Manual reset thermal overheat protector disconnects power during accidental blockage. Automatic fan delay removes the cold drafts on start-up and discharges residual heat from the heater body during shut down. Integral thermostat permits for easy adjustment of room temperature to maintain desired comfort level. Surface mounting frame mounts around the back box for a finished surface installation. The slot knock outs are used for power supply conduit. A double-pole, single throw ON/OFF switch mounts on the back box for positive disconnect of power supply. The heater assembly fits into the back box and consists of a heavy Gauge steel fan panel to which all of the operational parts of the heater are mounted. The back box is used as a recessed rough-in box in either masonry or frame installations and is also used when surface mounting frames are used in surface mounting installation. It includes heating unit, backbox and grille. It is suitable for use in vestibules, entrance ways, lobbies, hallways, stairwells, restaurants, conference rooms, offices, basements, family rooms, bedrooms. The heater is cETLus Intertek certified.
  • Tamper-proof plug for thermostat hole
  • Contemporary, commercial-grade steel grille provides comfort through optimized airflow
  • A plug button will be provided to replace the thermostat knob and render the unit tamper-resistant
  • Suitable for use in vestibules, entrance ways, lobbies, hallways, stairwells, restaurants, conference rooms, offices, basements, family rooms and bedrooms

Overview

Q-Mark CWH1000 Model Contemporary commercial fan-forced wall heater delivers an output of 6826/3413 BTU/Hour at 240-Volts, 5120/2560 BTU/Hour at 208-Volts. This 1-Phase heater employs impedance protected and permanently lubricated motor for long lasting performance. The 80% nickel, 20% chromium enclosed steel sheath heating element covers the entire air discharge area to ensure uniform heating of all discharged air. It operates at an air flow rate of 65 CFM at 30-ft. It has a voltage rating of 240/208-Volts, current rating of 8.3/4.2-Amps at 240-Volts, 7.2/3.61-Amps at 208-Volts and power rating of 2000/1000-Watts at 240-Volts, 1500/750-Watts at 208-Volts. The heater in northern white color, has heavy Gauge steel construction for added durability. Power On/OFF switch provides added safety during maintenance. Manual reset thermal overheat protector disconnects power during accidental blockage. Automatic fan delay removes the cold drafts on start-up and discharges residual heat from the heater body during shut down. Integral thermostat permits for easy adjustment of room temperature to maintain desired comfort level. Surface mounting frame mounts around the back box for a finished surface installation. The slot knock outs are used for power supply conduit. A double-pole, single throw ON/OFF switch mounts on the back box for positive disconnect of power supply. The heater assembly fits into the back box and consists of a heavy Gauge steel fan panel to which all of the operational parts of the heater are mounted. The back box is used as a recessed rough-in box in either masonry or frame installations and is also used when surface mounting frames are used in surface mounting installation. It includes heating unit, backbox and grille. It is suitable for use in vestibules, entrance ways, lobbies, hallways, stairwells, restaurants, conference rooms, offices, basements, family rooms, bedrooms. The heater is cETLus Intertek certified.

Specifications

List UOM Qty
1
Order UOM
ea
Model
CWH1000
Standards
cETLus Intertek Listed
Grille Dimension
10-5/8 Inch Width x 7/8 Inch Depth x 12-1/8 Inch Height
Heating Element
80% Nickel, 20% Chromium Enclosed In A Steel Sheath
Housing Material
Heavy Gauge Steel
Includes
Heating Unit, Backbox, Grille
Item Name
Fan-Forced Wall Heater
Voltage Rating
240/208 Volt
Motor Type
Impedance Protected and Permanently Lubricated
Output
6826/3413 BTU/Hour at 240 Volt, 5120/2560 BTU/Hour at 208 Volt
Phase
1
Power Rating
2000/1000 Watt at 240 Volt, 1500/750 Watt at 208 Volt
Temperature Rating
40 to 85 deg F
Type
Contemporary, Commercial
UNSPSC
40101800
Mounting
Wall
UPC
68536017942
Manufacturer Name
Marley Engineered Products
Manufacturer Part Number
CWH1202DSF
Energy Star Flag
No
Finish
No
Amperage Rating
8.3/4.2 Amp at 240 Volt, 7.2/3.61 Amp at 208 Volt
Air Flow
65 CFM
Brand Name
Q-Mark
Color
Northern White
Dimensions
10-5/8 Inch Width x 4-7/8 Inch Depth x 12-1/8 Inch Height

Documents

Brochure Catalog
Instruction Guide Specification Sheet
  1. Registration

    Click here to login or register your account. Business account customers will have access to account pricing and payment options.

  2. Help Center

    Click here for answers to common questions about ordering, shipping, payment, and returns, as well as contact information for our customer service team.

  3. Branch Locator

    Updating your home branch will make scheduling pick up orders faster and easier and will improve search results by bringing local products to the top of the list.

  4. Search

    Search using keywords, manufacturer part numbers, SKUs, trade slang, and more…

  5. Shop by Category

    Browse our catalog of thousands of products…

  6. Newsletter

    Sign up here to receive our latest deals and to be notified as we continue to improve the site.